| Test Method |
Long Name |
| ANSI A117.1 or ADA 28 CFR 36 |
ADA Accessible building usage Fixtures |
| ANSI Z124.1.2 (TUBS) |
Plastic Bathtubs |
| ANSI Z124.1.2 (TUBS) w/ CSA B45 |
Plastic Bathtubs |
| ANSI Z124.1.2 (SHOWER PANS) |
Plastic Shower Pans |
| ANSI Z124.1.2 (SHOWER PANS) w/ CSA B45 |
Plastic Shower Pans |
| ANSI Z124.1.2 (SHOWER STALLS) |
Plastic Shower Stalls |
| ANSI Z124.1.2 (SHOWER STALLS) w/ CSA B45 |
Plastic Shower Stalls |
| ANSI Z124.3 |
Plastic Lavatories |
| ANSI Z124.4 |
Plastic Waterclosets |
| ANSI Z124.6 (Kitchen Sink) |
Kitchen All types |
| ANSI Z124.6 (Bar Sink) |
Bar Sink |
| ANSI Z124.6 (Laundry Sink) |
Laundry Sink |
| ANSI Z124.6 (Service Sink) |
Service Sink |
| ANSI Z124.8 |
Plastic Bathtub Liners |
| ANSI Z124.9 (Water Fed) |
Plastic Urnials Water Fed |
| ANSI Z124.9 (Waterless) |
Plastic Urnials Waterless |
| ANSI Z358.1 |
Emergancy Eyewash/ Shower |
| ASME A112.1.3 |
Airgap Fitting for use w/Plumbing |
| ASME A112.18.1/CSA B125.1 (Lavatory Faucet) excluding NSF 61 |
Lavatory Faucets |
| ASME A112.18.1/CSA B125.1 (Kitchen Faucet w/out Spray) excluding NSF 61 |
Kitchen Faucets (without Spray) |
| ASME A112.18.1/CSA B125.1 (Kitchen Faucet w/ Spray) excluding NSF 61 |
Kitchen Faucets (with Spray) |
| ASME A112.18.1/CSA B125.1 (Tub Filler w/ Valves) excluding NSF 61 |
Bathtub Faucets |
| ASME A112.18.1/CSA B125.1 (Automatic Compensating Valve) excluding NSF 61 |
Shower Valve |
| ASME A112.18.1/CSA B125.1 (Diverter Valve) excluding NSF 61 |
Diverter Valve |
| ASME A112.18.1/CSA B125.1 (Hand Shower) excluding NSF 61 |
Hand Shower |
| ASME A112.18.2/CSA B125.2 (No Pop-Up) excluding cell Class |
Plumbing Fixture Waste Fitting |
| ASME A112.18.2/CSA B125.2 (Pop-Up) excluding cell Class |
Plumbing Fixture Waste Fitting |
| ASME A112.18.6 |
Flexible Water Connection |
| ASME A112.19.1/CSA B45.2 (Tub) |
Enameled Cast Iron Tub |
| ASME A112.19.1/CSA B45.2 (Sink) |
Enameled Cast Iron Sink |
| ASME A112.19.2/CSA B45.1 (Watercloset) |
Viteous China Watercloset |
| ASME A112.19.2/CSA B45.1 (Lavatory Sink) |
Viteous China Lavatory |
| ASME A112.19.2/CSA B45.1 (Bidet) |
Viteous China Bidet |
| ASME A112.19.2/CSA B45.1 (Urinal) |
Viteous China Urinal |
| ASME A112.19.3/CSA B45.3 |
Stainless Steel fixtures |
| ASME A112.19.4 |
Enameled Steel Fixtures |
| ASME A112.19.5 Trim |
Watercloset Bowls, Tanks, Urinals |
| ASME A112.19.6 (Urinals) |
Waste Removal of Watercloset & Urinals |
| ASME A112.19.6 (Waterclosets) |
Washing of Waterclosets & Urinals |
| ASME A112.19.7 (includes ANZI Z124.1 and ASME A112.19.8) excluding Electrical Testing (UL 1795) |
Whirlpool Baths |
| ASME A112.19.8 |
Suction Fittings Pools, Spas, Hot Tubs & Whirlpools |
| ASME A112.21.1 |
Floor Drains |
| ASME A112.21.2 |
Roof Drains |
| ASME A112.21.3 |
Hydrants for Utility & Maintenance Use |
| ASSE PLUMBING SPECS |
|
| ASSE 1001 (Less Toxicity) |
Pipe Applied Vacuum Breakers |
| ASSE 1002 (Less Toxicity) |
Watercloset Flush Tank Ball Cocks |
| ASSE 1003 (Less Toxicity) |
Water Pressure Reducing Valves |
| ASSE 1010 (Less Toxicity) |
Water Hammer Arresters |
| ASSE 1011 (Less Toxicity) |
Hose Connection Vacuum Breakers |
| ASSE 1012 (Less Toxicity) |
Backflow Prevention w/ Intermediate Atmospheric Vent |
| ASSE 1014 (Less Toxicity) |
Hand Held Showers |
| ASSE 1016 (Less Toxicity) |
Automatic Compensating Valves |
| ASSE 1017 (Less Toxicity) |
Temperature Actuated Mixing Valves for Domestic Use |
| ASSE 1019 (Less Toxicity) |
Vacuum Breaker w/ Hydrants |
| ASSE 1020 (Less Toxicity) |
Pressure Vacuum Breaker Assembly |
| ASSE 1021 (Less Toxicity) |
Drain Air Gaps for Domestic Dishwasher Applications |
| ASSE 1024 (Less Toxicity) |
Dual Check Valve Type Backflow Preventers |
| ASSE 1032 |
Dual Check Valve Type Backflow Preventers |
| ASSE 1035 (Less Toxicity) |
Laboratory Faucet Backflow Preventers |
| ASSE 1037 (Less Toxicity) |
Pressurized Flushing Devices (Flushometers) |
| ASSE 1050 |
Air Admittance Valves-Stack Type Devices |
| ASSE 1051 |
Air Admittance Valves-Branch Type Devices |
| ASSE 1050 & 1051 Combined |
AAV (Stack & Branch Combination) |
| ASSE 1052 (Less Toxicity) |
Hose Connection Backflow Preventers |
| ASSE 1066 (Less Toxicity) |
Individual Pressure Balancing In-Line Valves |
| ASTM PLUMBING SPECS |
|
| ASTM C 282 |
Acid Resistance of Porcelain Enamels |
| ASTM C 283 |
Resistance of Porcelain Enameled Utensils to Boiling Acid |
| ASTM C 448 |
Abraision Resistance of Porcelain Enamels |
| ASTM C 614 |
Alkali Resistance of Porcelain Enamels |
| ASTM D 1598 |
Time to Failure of Plastic Pipe under Constant Pressure |
| ASTM D 1599 |
Resistance to Short Time Hydraulic Failure |
| ASTM D 1785 |
PVC Pipe |
| ASTM D 2152 |
Fusion of Sxtruded PVC Pipe by Acetone Immersion |
| ASTM D 2239 |
PE Pipe |
| ASTM D 2241 |
PVC Pressure-Rated Pipe |
| ASTM D 2412 |
External Loading Charact. Plastic Pipe by Parallel Plate loading |
| ASTM D 2444 |
Impact Resistance of Pipe by means of Falling Tup |
| ASTM D 2564 |
Solvent Cements for PVC |
| ASTM D 2666 |
PE Plastic Tubing |
| ASTM D 2737 |
ABS Pipe and Fittings |
| ASTM D 3965 |
PVC Flexible Membrane |
| ASTM D 4551 |
Poly (Vinyl Chlorine) (PVC) Plastic Flexible Concealed Water Containment Membrane |
| ASTM E 1347 |
Reflectance |
| ASTM F 409 |
Replaceable Sink Strainers |
| ASTM F 409 |
Replaceable Lavatory Drain/No pop up |
| ASTM F 409 |
Replacable Lavatory Drain with Pop-up |
| ASTM F 409 |
Replaceable Bath Waste |
| ASTM F 462 |
Consumer Safety For Slip Resistance |
| ICPA SS-1-2001 |
Solid Surface Material |
| ASTM D 756 |
Practice for Determination of Weight and Shape Changes of Plastics Under Accelerated Service Conditions (Withdrawn 1998) |
| ASTM D 779 |
Standard Test Method for Water Resistance of Paper, Paperboard, and Other Sheet Materials by the Dry Indicator Method |
| ASTM D 790 |
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
| ASTM D 828 |
Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus |
| ASTM D 896 |
Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents |
| ASTM D 903 |
Standard Test Method for Peel or Stripping Strength of Adhesive Bonds |
| ASTM D 905 |
Standard Test Method for
Strength Properties of Adhesive Bonds in Shear by Compression Loading |
| ASTM E 108 |
Standard Test Methods for Fire Tests of Roof Coverings |
| ASTM E 1252 |
Standard Practice for General Techniques for Obtaining Infra-Red Spectra for Qualitative Analysis |
| ASTM E 136 |
Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750�C |
| ASTM E 162 |
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source |
| ASTM E 2126 |
Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Walls for Buildings |
| ASTM E 2178 |
Standard Test Method for Determining Air Permeance of Building Materials |
| ASTM E 2273 |
Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies |
| ASTM E 2634 |
Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems |
| ASTM E 330 |
Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference |
| ASTM E 331 |
Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference |
| ASTM E 334 |
Practices for General Techniques of Infrared Microanalysis |
| ASTM E 547 |
Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference |
| ASTM E 648 |
Standard Test Method for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source |
| ASTM E 661 |
Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads |
| ASTM E 662 |
Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials |
| ASTM E 72 |
Standard Test Methods of Conducting Strength Tests of Panels for Building Construction |
| ASTM E 84 |
Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 96 |
Standard Test Methods for Water Vapor Transmission of Materials |
| ASTM E 970 |
Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source |
| ASTM F 1306 |
Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates |
| ASTM F 1575 |
Standard Test Method for Determining Bending Yield Moment of Nails |
| ASTM F 680 |
Standard Test Methods for Nails |
| ASTM G 152 |
Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
| ASTM G 153 |
Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
| ASTM G 153 |
Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for
% Exposure of Nonmetallic Materials |
| ASTM G 154 |
Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials |
| ASTM G 155 |
Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
| ASTM G 23 |
Standard Practice for Operating Light-Exposure Apparatus (Carbon-Arc Type) with and without Water for Exposure of Nonmetallic Materials |
| ASTM G 26 |
Practice for Operating Light-Exposure Apparatus (Xenon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials |
| ASTM G 53 |
Practice for Operating Light- and Water-Exposure Apparatus (Fluorescent UV-Condensation Type) for Exposure of Nonmetallic Materials |
| AWPA E 12 |
Standard Method of Determining Corrosion of Metal in Contact with Treated Wood |
| BSS 7238 |
Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials |
| BSS 7239 |
Test Method for determining the toxic gas generating characteristics of aircraft materials Using the National Bureau of Standards smoke density chamber |
| CAN/CGSB 37.54 |
Polyvinyl Chloride Roofing and Waterproofing Membrane |
| CAN/ULC S102 |
Method of Test for Surface Burning Characteristics of Building Materials and Assemblies |
| CAN/ULC S102.2 |
Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings, and Miscellaneous Materials and Assemblies |
| CAN/ULC S107 |
Methods of Fire Tests of Roof Coverings |
| CAN/ULC S109 |
Flame Tests of Flame-Resistant Fabrics and Films |
| CAN/ULC S701 |
Standard for Thermal Insulation, Polystyrene, Boards and Pipe Covering |
| CAN/ULC S705 |
Standard for Thermal Insulation - Spray Applied Rigid Polyurethane Foam, Medium Density - Material |
| CAN/ULC S712 |
Standard for Thermal Insulation - Light Density, Open Cell Spray Applied Semi-rigid Polyurethane |
| CAN/ULC S770 |
Standard Test Method for Determination of Long-term Thermal Resistance of Closed-Cell Thermal Insulating Foams |
| CAN/ULC S774 |
Standard Laboratory Guide for the Determination of Volatile Organic Compound Emissions from Polyurethane Foam |
| CCMC 07272 |
Technical Guide for Air Barrier Systems for Exterior walls of low-rise buildings |
| CCMC 07273. 5 |
Technical Guide for Air Barrier Materials |
| CGSB 37-GP-52M |
Roofing and Waterproofing Membrane, Sheet Applied, Elastomeric (Withdrawn) |
| CPAI 84 |
Specification for Flame-resistant Materials Used in Camping Tentage |
| CSFM Title 19 1237.1 |
Flame Retardant Regulations |
| DIN EN 12667/12939 |
European standard for measurements of insulating materials using the heat flow meter or the guarded hot plate techniique |
| DIN EN 13163 |
European standard for characterization of foam insulations for building applications using the heat flow meter or the guarded hot plate techniique |
| FAR 25.855 |
Vertical Bunsen Burner Test for Cabin and Cargo Compartment Materials |
| FM 4450 |
Approval Standard for Class I Insulated Steel Decks |
| FM 4470 |
Approval Standard for Class I Roof Covers |
| FTMS 191A method 5903.1.89 |
Flame Resistance of Cloth Vertical |
| FTMS 191A method 5908 1978 |
Flammability Burning Rate of cloth 45 degree angle |
| ICC ES AC 38 |
Water resitive Barriers |
| ICC-ES AC 04 |
ACCEPTANCE CRITERIA FOR SANDWICH PANELS |
| ICC-ES AC 05 |
ACCEPTANCE CRITERIA FOR SANDWICH PANEL ADHESIVES |
| ICC-ES AC 07 |
ACCEPTANCE CRITERIA FOR SPECIAL ROOFING SYSTEMS |
| ICC-ES AC 107 |
ACCEPTANCE CRITERIA FOR CLASSIFIED WOOD ROOF SYSTEMS |
| ICC-ES AC 11 |
ACCEPTANCE CRITERIA FOR FIBER CEMENTITIOUS EXTERIOR WALL COATINGS |
| ICC-ES AC 114 |
ACCEPTANCE CRITERIA FOR RIGID, POLYETHYLENE, BELOW-GRADE, DAMPPROOFING AND WALL WATERPROOFING MATERIAL |
| ICC-ES AC 116 |
ACCEPTANCE CRITERIA FOR NAILS AND SPIKES |
| ICC-ES AC 12 |
Acceptance Criteria for Foam Plastic Insulation |
| ICC-ES AC 148 |
Flashing Materials |
| ICC-ES AC 16 |
ACCEPTANCE CRITERIA FOR PLASTIC GLAZED SKYLIGHTS |
| ICC-ES AC 166 |
ACCEPTANCE CRITERIA FOR METAL ROOF COVERINGS |
| ICC-ES AC 17 |
ACCEPTANCE CRITERIA FOR GLASS GLAZED UNIT SKYLIGHTS AND SLOPED GLASS GLAZING |
| ICC-ES AC 180 |
CLAY AND CONCRETE ROOF TILES |
| ICC-ES AC 188 |
Roof Underlayment |
| ICC-ES AC 191 |
ACCEPTANCE CRITERIA FOR METAL PLASTER BASES (LATH) |
| ICC-ES AC 207 |
Polypropylene Roof Underlayment |
| ICC-ES AC 207 |
Polypropylene Roof Underlayment |
| ICC-ES AC 219 |
ACCEPTANCE CRITERIA FOR EXTERIOR INSULATION AND FINISH SYSTEMS |
| ICC-ES AC 235 |
EIFS Clad Drainage wall Assemblies |
| ICC-ES AC 275 |
ACCEPTANCE CRITERIA FOR GLASS FIBER LATH USED IN CEMENTITIOUS EXTERIOR WALL COATINGS OR EXTERIOR CEMENT PLASTER (STUCCO) |
| ICC-ES AC 377 |
ACCEPTANCE CRITERIA FOR SPRAY-APPLIED FOAM INSULATION |
| ICC-ES AC 39 |
Walking Decks |
| ICC-ES AC 390 |
ACCEPTANCE CRITERIA FOR WALL PANELS WITH A WELDED STEEL PERIMETER FRAME USED IN AGRICULTURAL STORAGE STRUCTURES |
| ICC-ES AC 395 |
ACCEPTANCE CRITERIA FOR HEADED SHEAR STUD REINFORCEMENT ASSEMBLIES FOR CONCRETE SLABS OR FOOTINGS |
| ICC-ES AC 48 |
Roof underlayement for use in Severe Climate Areas |
| ICC-ES AC 51 |
Precast Stone Veneer |
| ICC-ES AC 66 |
ACCEPTANCE CRITERIA FOR FIRE-RETARDANT-TREATED WOOD |
| ICC-ES AC 71 |
ACCEPTANCE CRITERIA FOR FOAM PLASTIC SHEATHING PANELS USED AS WATER-RESISTIVE BARRIERS |
| ICC-ES AC 75 |
Membrane roof-covering Systems |
| ICC-ES AC 90 |
ACCEPTANCE CRITERIA FOR FIBER CEMENT SIDING USED AS EXTERIOR WALL SIDING |
| ICC-ES AC 92 |
ACCEPTANCE CRITERIA FOR POLYMER-BASED AND POLYMER-MODIFIED EXTERIOR AND INTERIOR WALL CLADDING |
| ISO 8301 |
Standard test technique for measurements of insulating materials using the heat flow meter method |
| NFPA 701 |
Standard Methods of Fire Tests for Flame Propagation of Textiles and Films |
| SBCCI SSTD 11 |
Test Standard for Determining Wind Resistance of Clay or Concrete Roof Tiles |
| TAS 112 |
Standard Requirements for Concrete Roof Tiles |
| TAS 114 Appendix H |
Test Procedures for Small Scale QC and Physical Properties of Approved Roof System Assemblies |
| UBC 15-5 |
Roof Tiles |
| UBC 15-6 |
Modified Bitumen, Thermoplastic and Thermoset Membranes Used for Roof Covering |
| UBC 24-1 |
Flat Glass |
| UBC 24-2 |
Safety Glazing |
| UBC 7-6 |
Thickness and Density Determination for Spray-applied Fireproofing |
| UL 1256 |
Fire Test of Roof Deck Constructions |
| UL 1715 |
Standard for Fire Test of Interior Finish Material |
| UL 1897 |
Uplift Tests for Roof Covering Systems |
| UL 1897 |
Uplift Tests for Roof Covering Systems |
| UL 2218 |
Standard for Impact Resistance of Prepared Roof Covering Materials |
| UL 580 |
Tests for Uplift Resistance of Roof Assemblies |
| UL 723 |
Tests for Surface Burning Characteristics of Building Materials |
| UL 790 |
Standard Test Methods for Fire Tests of Roof Coverings |
